Cut-N-Seal® is a colour-matched, brush-on wood preservative for cuts and holes in pressure treated wood that expose untreated wood in above ground applications. The copper-based, waterborne formula is low VOC and low odour. Cut-N-Seal is not to be used in preserved wood foundations, to recoat pressure treated wood surfaces, or as a replacement for pressure treatment. Not for use in Dwellings.

Brush on two coats of Cut-N-Seal wood preservative on all cuts and holes in pressure treated wood that expose untreated wood For use above ground on deck boards, railing, post tops, and fence boards Protects cut ends against rot and decay Copper-based, waterborne formulation Low VOC and low odour Ready to use; shake or stir before and during use Apply by brush; do not spray or dip Apply above 10°C; keep from freezing Soap and water clean-up Sienna/cedar color closely matches brown pressure treated wood 3.78 L NOTE Does not replace pressure treatment